SCDF Fire Safety Certificate Cost and Timeline for F&B Outlets in Singapore

If your F&B fit-out involves fire safety works, such as relocating exits, fire doors or fire alarm panels, you need a Fire Safety Certificate from SCDF before you can use the premises. The certificate is only issued after all the works are finished, so its cost and timing feed directly into your opening date.
SCDF charges no fee for the Fire Safety Certificate application itself. You do pay SCDF a plan fee earlier in the process: for change of use or alterations to existing fire safety works that do not add floor area, it is $90 per storey. The higher costs are your Qualified Person, your Registered Inspector, and the fire safety works. Once the works are done and certified, your Qualified Person applies through CORENET, and SCDF responds within 3 working days. If SCDF selects the application for inspection, the inspection is normally carried out within 10 days of the application.
These figures come from SCDF’s published guidance. Fees can change, so check SCDF’s pages before you budget.
How Much Does an SCDF Fire Safety Certificate Cost for an F&B Outlet?
SCDF’s own fees are small. The table shows each cost item and who charges it.
Cost item | Who charges it | Amount |
Fire Safety Certificate application | SCDF | No fee |
Plan fee, change of use or alterations to existing fire safety works with no added floor area | SCDF | $90 per storey |
Qualified Person, Registered Inspector and fire safety works | Private professionals and contractors | Varies with your layout and scope |
SCDF also has a lodgement route for minor additions and alterations, charged at $90 per submission. Your Qualified Person will confirm which route your works fall under.
We do not publish a flat price for FSSD submissions. The cost depends on your layout and what the works involve.
When Does an F&B Fit-Out Need a Fire Safety Certificate?
You need a Fire Safety Certificate after completing fire safety works, such as changing the layout of a fire compartment or spaces that affect the means of escape, or relocating fire alarm panels, exit signs or fire doors. SCDF requires it before you use or occupy the premises. Not every fit-out involves these works.
Skipping it is not an option. SCDF states that failing to obtain the certificate is an offence under the Fire Safety Act 1993, and the owner is liable to court action.
Only a Qualified Person, meaning a registered architect or professional engineer, can make the FSSD submission. We work with Qualified Persons, who prepare the fire safety plans and make the submission, and we coordinate the process through our FSSD submission service, so the plans and the paperwork stay in one place.
How Long Does an SCDF Fire Safety Certificate Take?
The plans come first. SCDF must approve the plans for your fire safety works before the works start, so the certificate sits at the end of your fit-out schedule, not the start.
After your fire safety works are complete and a Registered Inspector has certified them, your Qualified Person applies through CORENET. SCDF responds within 3 working days. If the application is selected for inspection, SCDF normally carries it out within 10 days of the application. If the inspection finds problems, the Qualified Person corrects them and applies again.
SCDF’s timeframes cover only its part. The fire safety works themselves take as long as your fit-out takes.
Other approvals run alongside it. URA may ask for clearances from agencies such as SCDF as part of a URA Change of Use application, so plan the two together. Your food licence application is another step to fit into your opening date.
If SCDF Charges Nothing, Why Pay for Help?
Because SCDF’s fees are only a small part of the job. Your contractor cannot submit the plans, since only a Qualified Person can, and a Registered Inspector must certify the works before the certificate application goes in. We coordinate the FSSD submission with the Qualified Person on your behalf, so you have one point of contact instead of several.
If you are planning a fit-out and are not sure what your layout triggers, get in touch with CMM Food Consultancy or call +65 9758 5888. We will tell you whether you need an FSSD submission and what the steps are.
FAQs
Can I open while I wait for the certificate?
Only with a Temporary Fire Permit. SCDF only issues one if your fire safety works are satisfactorily completed with only very minor outstanding issues. How long it takes to get the full certificate after that depends on the size and complexity of your project.
I only want to move an exit sign. Does that count?
Yes. Relocating exit signs, fire alarm panels, or fire doors counts as fire safety works, which usually need an FSSD submission. Check before your contractor moves them, not after.
My unit has two floors. Do I pay the plan fee twice?
Yes, if both storeys are covered by the plans. The $90 plan fee is charged per storey, so plans covering two storeys cost $180.
Is a Fire Safety Certificate the same as a Fire Certificate?
No. A Fire Safety Certificate is issued once, after your fire safety works are complete. A Fire Certificate is a separate, recurring certificate for designated buildings, such as public buildings other than residential buildings, with an occupant load of more than 200 persons. From 1 April 2026, SCDF has extended Fire Certificate validity from one year to three years for buildings with a good compliance track record.



Comments